PROFINE® PFAS LINE PROFINE® PFAS removes Perfluoroalkyls (Pfas) and bad odours and off-tastes in drinking water. Pfas selective resin, 0.5 µm final filtration stage with Profine® Carbon Block technology added with silver ions for bacteriostatic action. To be used with a Pfas concentration of less than 500 ng / l..
REMOVES BAD ODOURS AND OFF-TASTES AND REDUCES CHLORINE BACTERIOSTATIC FEATURE REDUCE PFAS CONCENTRATION
REDUCTION OF THE PFAS AND MICROFILTRATION BIG PROFINE® PFAS It is ideal for professional use where large quantities of refined water are needed. The cartridge must be powered only with cold water. Thanks to the multi-stage concept that combines the selective pfas resin and Profine® Carbon Block technology, the Profine® BIG Pfas cartridge offers the guarantee of a good and safe water by eliminating the Pfas.
CONDITIONING VALVE The process of activating the water filters consists of an initial start-up phase called Conditioning. Conditioning is an initial filter rinsing process required to ensure ideal operating conditions for the filter. This initial rinse guarantees the complete cleansing of all the inner filtering devices and the circuit itself. Conditioning should only be carried out during the first cartridge activation. This operation may take from a few seconds to several minutes. We also recommend doing it when the filter has been idle for long periods. You can find the indications for how many litres to use for the correct conditioning in the product technical data sheets.
We recommend replacing the cartridge at the end of its nominal range, or if the output flow ate is too slow. Its better that you replace the cartridge within 365 days of its installation. Before removing the cartridge, close the upstream water inlet and eliminate the pressure in the circuit by opening the downstream tap. To activate the cartridge correctly, open the inlet valve and supply water for at least five minutes before drinking it.